Transmitter Activated Buzzer with iKON

It is possible to use the iKON2 AUX whose output corresponds to the CH2 connector of the iKON2 for this purpose. It is usually preassigned to channel 8 of the transmitter.

If a battery or BEC is already connected to the CH2 connector, just use a “Y” cable to continue using that as a voltage input.

In doing this, any Auto Level and/or Rescue functions assigned to the iKON2 AUX in the Auto Level / Rescue panel of the wizard must be disabled. If you want to use the Auto Level and/or Rescue functions, activate them on one of the three Setups 1/2/3 (preferably in Setup 2 or 3) in the same panel as the Wizard.